3 Plumbing Services That Can Save You Money

Posted on: 24 October 2016

Share

Are you looking for ways to save on home plumbing and keep your utility costs down? Do you often feel like you're flushing your hard-earned cash down the toilet? The solution may lie within the plumbing pipes, fixtures, and fittings inside your home. Learning how to conserve water and detect potential problems before they escalate into a major disaster can save you money in the long run. The following common and convenient plumbing services can help you decrease energy costs and possibly prolong the life of your appliances:

1. Have a Water Softener System Installed

Ask your plumber about the benefits of installing a water softener system and you're likely to hear of a noteworthy advantage: It just may extend the life of your major appliances, such as the washing machine and dishwasher. This can result in a major money saving benefit.

If you have hard water in your home, you will notice a build of of calcium, lead, iron, and limescale over a period of time. These minerals can place a strain on your appliances and force them to work harder. In some cases, it can affect the performance of your machines significantly. Repair and maintenance costs add up, and replacement costs will be significant. Why take the risk? Ask your plumber about installing a water softener system and see how you can save money.

2. Replace Your Water Heater and Go Tankless

If you feel you're wasting water, consider having your plumber install a tankless water heater for a more energy efficient solution. While the initial cost and installation may be higher than the standard option, you will save on future utility costs. With a tankless water heater, the water doesn't stand by idly in the tank. Instead, the hot water is supplied as you need it, so less water is used and wasted. There is no storage tank, and the water is heated only as needed by demand. Be sure to ask for an Energy Star Rated model for the highest efficiency.

3. Switch Out Your Shower Head For a Low Flow Model

The standard shower head can utilize and waste a lot of water during a typical 15 minute shower. Fortunately, there is a way to counteract this effect. Change out your old shower head with a cost-effective, low flow model. You can find these efficient fixtures at most hardware and home improvement stores, and if you are not inclined to install it yourself, your local plumber can do the job for you in no time.

The concept of a low flow shower head is simple: enjoy the same results in the shower while using minimal water. As with most shower heads, you may choose from a stationary or hand-held model. You may also choose a designer head to complement your bathroom decor, or a more basic and inexpensive model. Either way, the end result is the same.

In a nutshell, the low flow shower head uses less force (pressure) to expel the water. Doing so means less water is used. And this is how you will save money. If you prefer to have control over the flow and pressure, choose a model with a flow restriction feature. This allows you to adjust the flow of water according to the water pressure in your home. For the novice, choose a model with an automatic regulator that senses water pressure and adjusts the flow as needed. It's a neat innovation that can save you money.

In conclusion, rely on plumbing services that focus on helping the homeowner save money. Routine maintenance and plumbing inspections by a professional can detect problems before they escalate into something major and costly. Contact a company like Aurora Plumbing and Electric Supply, Inc for more information.